NEEDLE VALVES - SERIES

Ø Well-Lok Twin Ferrule Tube Fitting

Ø Fine-Lok Single Ferrule Tube Fittings

Ø Precision Pipe Fittings & Adapters

Ø Ball Valves

Ø Needle Valves

Ø Rising Stem Plug Valves

Ø Gauge / Root Valves

Ø Purge Valves

Ø Bleed Valves

Ø Toggle Valves

Ø Check Valves

Ø Micron in Line Filters

Ø Bite -Lok Tube Fittings to DIN 2353

Ø Needle Valves

Ø 37⁰ Flared Tube Fittings

Ø Quick Connect Couplings

Ø Swivel Joints

Hydraulic Applications

Pneumatic Applications

Ø Stainless Steel Push in Fittings

Ø Flow Control Regulators

Ø Quick Exhaust Valves

Ø Quick Connect Couplings

Ø Check Valves

Ø Chemicals & Petrochemicals

Ø Food, Beverages & Pharmaceuticals

Ø Hydraulic, Pneumatic &
Instrumentations

Ø Marines

Ø Oil & Gas Industries

Ø Power Generations

Ø Pulp & Papers

Ø Semiconducter Industries

Ø Alternative Fuels

Instrumentation Applications

Industries Served

NEEDLE VALVES :

l Compact design
l Available in SS316
l Low operating Torques
l Forged Body, straight and Angle patterns
l Panel mountable
l Variety of stem tips
l PTFE packing standard
l Flow coefficient (Cv) from 0.09 to 1.8
l Orifice size : 0.078" (2mm), 0.172" (4.4mm), 0.250"
    (6.4mm) 0.375" (9.5mm)
l Variety of end configurations includes
    SEALEXCEL^®Well-Lok™ Tube Fittings, Male/Female
    NPT, BSPT and BSPP pipe connections
l Every valve is factory tested.

OPERATING PARAMETERS

Our Broad Product range serves wide variety of applications.

No.	Component	Material
1	Bar Handle	SS316
2	Set Screw	SS316
3	Packing Nut	SS316
4	Upper Gland	SS316
5	Packing	PTFE
6	Lower Gland	SS316
7	Stem	SS316
8	Panel Nut	SS316
9	Forged Body	SS316

FEATURES

Pressure Rating : upto 5000 psig (340 bar) at CWP
Temperature Rating : -54ºC to 232ºC with PTFE Packing

APPLICATIONS

l General plant service
l Instrument Isolation
l Hydraulic and pneumatic
l Pressure measurement devices
l Venting

MATERIAL OF CONSTRUCTIONS

STEM

SEALEXCEL^® Needle Valves are available with choice of optional stem to provide greater flexibility.
NON-ROTATING (NR) : It is Standard self centering non rotating stem tip typically used in high cycle application to
                                   extend the valve life.
V-STEM (VS)             : It is used for general purpose liquid and gases.
SOFT SEAT (SS)       : A soft seat stem requires a lower sealing torque, It is replaceable and suitable for
                                  temperature upto 120ºC
REGULATING STEM (RS) : It is used where some degree of flow control required.

Temperature

-54ºC to 38ºC

-54ºC to 93ºC

-54ºC to 148ºC

-54ºC to 176ºC

-54ºC to 204ºC

-54ºC to 232ºC